Linear Series Wet Area Panelling
The WallART Linear Series is a versatile and more durable alternative to conventional tiles, and is perfect for any interior space that collects moisture, including the bathroom, kitchen, laundry and shower recess.
The WallART Linear Series is a wet area panelling solution available in a range of attractive colours and patterns.
Water Resistant
The Linear Series is double-sided and perfect for any indoor space that collects moisture, including the bathroom, kitchen, laundry and shower recess.
Durable
Made from high-pressure laminate it can withstand impact far greater than ceramic tiles, and will not chip, discolour or fade. Being non-porous allows it to perform even in humid conditions like shower recesses.
Hygienic
The Linear Series will not attract mould because it is grout-free. This also makes cleaning a breeze - simply wipe with a damp cloth and non-abrasive cleanser.
Stylish
The Linear Series offers you a range of attractive styles, from classic monochromes to contemporary patterns - all with joiners to match. Its streamlined finish makes it a versatile alternative to conventional tiles or splashbacks.
Further Information on WallART Linear Series:
Colours
- Please click the checkbox of the sample(s) you would like to request and proceed to the bottom of the page.
- Enter your email address in the space provided and we will send your samples promptly.
Please note there is a maximum of 5 samples per order.
You may only request samples for one particular product at a time.
To order more samples of other products please repeat this process.
Request Samples
Sizes/Specs
| Sheet Size |
2400 x 1200 mm |
| Thickness | 3.0 mm (tolerance ±0.2 mm) |
| Finish | Gloss |
| Weight | 4.35 kg/m2 |
| Density | 1450 kg/m3 |
wallart_linear_series_msds 46.45 KbJoiner Profiles
Joiner Colour Chart
Installation
The WallART Linear Series is simple to install. Our easy-to-follow linear_installation_guide_nz enables you to give your space a professional look at just a fraction of the cost, without the need for backing materials.
Safety First
When working in areas that generate dust it is advisable that you wear
protective goggles, a dust mask and work gloves. Storage and work areas
should be well ventilated.
Conditioning
It is important that you condition your panels by placing them in the
room where they will be installed. Leave a space between sheets to
allow for air circulation. For rooms above ground level, allow panels
to condition for 24 hours. For rooms below ground level, allow for 48
hours.
Handling
To avoid scratching the surface of your panels, ensure that the work
area remains clean, avoid contact between the panel and abrasive
surfaces and take care when moving the panel to avoid chipping any
edges.
Planning and Preparation
Calculate the number of panels required to complete your project and
gather the necessary tools and materials from the following list:
- Tape measure
- Spirit level
- Pencil
- Carpenter's square
- Fine tooth handsaw or fine tipped tungsten machine saw
- Fine tooth hacksaw
- Hand plane
- Sandpaper
- Timber battens
- Electric drill & hole cutting bit
- Nails
- Hammer
- Staple gun
- Caulking gun
- Adhesive (we recommend Sika Showerbond)
- Caulking compound (we recommend SikaSilaflex NG)
- Wood block / cloth
- Mineral spirits
- Colour -matched joiners to join panels and finish off installation
Care and Maintenance
To maintain its original lustre, panels should be cleaned with a mild liquid non-abrasive cleanser. Avoid using abrasive powder cleansers.
The WallART Linear Series is tested and approved to international standard ISO 4586 for high-pressure laminate.
Gallery
 |
 |
 |
 |
Brochures
Click the brochures or samples tab of the product you would like more information about.